How to Razor Cut Long Hair (with Pictures) (2025)

Explore this Article

parts

1Getting Ready to Cut

2Cutting the Bottom Layers

3Cutting the Remaining Layers

Other Sections

Tips and Warnings

Things You'll Need

Related Articles

References

Co-authored byAshley Adams

Last Updated: April 14, 2020References

Razor cutting hair is a great way to add texture and layers without a lot of time and effort. It sounds fancy, but it is actually quite simple to do. All you need is a carving comb, or a fine-toothed comb with a razor inside of it. Razor cutting works the best on those with straight hair, but you can try it if you have curly or wavy hair too.

Part 1

Part 1 of 3:

Getting Ready to Cut

  1. 1

    Determine if razor cutting is recommended for your hair type. Razor cutting is a great way to add smooth layers and soft texture to straight or wavy hair.[1] You can also use razor cutting to thin thick hair or to bring out natural curls.[2] If you have fine, ethnic, or frizzy hair, however, you may want to take a pass on razor cutting, as it will only damage your hair and lead to more frizz.[3]

  2. 2

    Decide on what style you want. Never start cutting your hair blind; have some sort of idea in mind. Do you want to cut your hair short, or do you just want to add some layers? What about a face-framing cut? Do some research and print out reference pictures; look for models who have a hair texture similar to your own.

    • Great places to do research for haircuts are websites like Pinterest and Instagram!
    • One popular for long hair is where you cut layers into the front, and keep the back at its original length (or close to it).
    • The shorter you plan to cut your hair, the higher up the layers will need to be in order to look proportionate.

    Advertisement

  3. 3

    Obtain a carving comb. A carving comb typically looks like a rat-tail comb, except that it has a razor inside the blades. They typically have wide teeth on one side, and fine teeth on the other. You can find them in well-stocked beauty supply shops, in hair salons, and online.

    • If you already own a carving comb, make sure that the blade is sharp. It might be a good idea to replace it, regardless. A sharp blade is key to getting a good hair cut.
  4. 4

    Get your hair wet. You can wash your hair with shampoo and conditioner first, if you want to, but your hair needs to be wet while you cut it. If you cut it while it is dry, you risk damaging it. This is important for all hair types, especially curly hair, which becomes straighter when wet and therefore easier to cut.[4]

  5. 5

    Section off the top part of your hair. Use the handle of a rat-tail comb to divide your hair in half horizontally at about eye brow level. Gather all of the hair from the upper section, twist it out of the way, and secure it with a clip.

    • If you want more layers, divide your hair at about ear level (or lower) instead. This will great a thicker upper layer, which you can divide further later on.

    Advertisement

Part 2

Part 2 of 3:

Cutting the Bottom Layers

  1. 1

    Use a comb to pull a thin section of hair in front of your face. Pick a side to start on: left or right. Gather a 1 to 2in (2.5 to 5.1cm) wide section from the start of that side (temple region). Use a rat-tail comb or the razor-less part a carving comb to pull the hair section in front of your face and away from your body.[5]

  2. 2

    Pinch the section between your finger where you want it cut. Make a V-shape with your forefinger and middle finger. Close your fingers in a scissor-like motion against the section of hair. Slide your fingers down the length of the section, stopping where you want to cut it. How much you decide to cut off is up to you.

    • If you just want to trim your hair, bring your fingers down until they are just above the ends. A trim is usually between 12 and 1 inch (1.3 and 2.5cm) of hair.
    • If this is your first time cutting your hair, bring your fingers lower than where you want to cut. It is easier to trim more off than add hair back.
  3. 3

    Point your fingers upwards and angle them. Give your hand a slight twist so that your fingers are pointing upwards; this will make it easier to cut the hair. Angle your fingertips slightly towards your face.

  4. 4

    Cut the hair at a downward angle using the carving comb. Use short, quick strokes while moving downward. Slide your fingers down the length of your hair while you cut. This will not only keep you from nicking them, but it will also help create the angle.[6]

    • If you have curly hair, be sure to cut with the curl rather than against it.[7]
  5. 5

    Grab another section and measure it up against the previous one. Take another 1 to 2in (2.5 to 5.1cm) section from right next to the first one, moving towards your ear. Add a few strands from the previous section to it. Pinch the section between your fingers, like before. Pull the section out in front of your face, and slide your hand down until you are just past the tips of the already-cut section.

  6. 6

    Cut the new section and move onto the next one. Keep cutting the strands using short, downward motions, working from one side of your head to the back. Repeat the process on the other side of your head. Always pull the strands of hair in front of your face and use already-cut strands as a guide for accuracy and evenness.[8] Stop when you get to the crown.

    Advertisement

Part 3

Part 3 of 3:

Cutting the Remaining Layers

  1. 1

    Un-clip the hair at the top part of your head. If you started with a thin, bottom layer, you will need to section another layer, clip the upper potion of your hair up again, then cut the new layer. Keep working in layers until you reach the hair at the crown of your head (eyebrow-level and up).

    • Use the already-cut layers as a measuring guide for the new, uncut layers. Hold the uncut strands up against the already-cut ones.
  2. 2

    Brush the hair on the top of your head over your face. Gather everything from the back of your crown-forward, and comb it over your forehead, so that it falls in front of your face.

  3. 3

    Gather the hair in your hand. Close your hand around the hair you just gathered, like holding onto a rope. Slide your hand downward until the forefinger and thumb are level with where you want to cut it.

  4. 4

    Cut the hair using short, downward strokes. Keep the comb above your hand, cutting down towards it. Work your way across the hair, from left to right. Because of the way you are holding your hair, the sides will end up a little longer than the middle.[9]

  5. 5

    Comb your hair back and touch it up, if needed. Check your hair at the front of your face, and make sure that the left side matches up with the right. Take a glance in a three-way mirror and check out the back of your hair. Use the carving comb to trim off any uneven strands so that they match up with the adjacent ones.

    • If you don't have a three-way mirror, stand with your back to your mirror, and hold another mirror up in front of you.
  6. 6

    Dry and style your hair. Once you are happy with the cut, comb your hair back and gently shake it to dislodge any cut strands. Apply your usual styling product, then blow dry your hair using a round brush for extra movement.

    Advertisement

Expert Q&A

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit


      Advertisement

      Tips

      • If you are cutting your hair very short, consider taking the bulk off with scissors first, then using the carving comb to add texture.

        Thanks

        Helpful1Not Helpful0

      • Consider getting a three-way mirror so that you can see the back of your hair easily.

        Thanks

        Helpful1Not Helpful0

      • Drape a barber's cape or hair dyeing cape over your shoulders to keep your clothes clean.

        Thanks

        Helpful0Not Helpful0

      Show More Tips

      Advertisement

      Warnings

      • If you choose to cut your kinky hair with a razor, use a hot tool to straighten your hair before cutting it.

        Thanks

        Helpful3Not Helpful0

      • Re-consider razor cutting your hair if it is frizzy, kinky, or fine, as doing so can damage it.

        Thanks

        Helpful3Not Helpful0

      Advertisement

      Things You'll Need

      • Razor comb or carving comb
      • Hair clips
      • Rat-tail comb

      You Might Also Like

      How toMake CoffeeHow toBecome Taller Naturally
      The Best Couples Halloween Costumes for 2021How toImprove Your Alexa RankingHow toSlim Your FaceHow toStart a Vegetable GardenHow toBe a CholoHow toOrganize Your ScheduleHow toReduce Plastic UseHow toMake Homemade PastaHow toIronHow toContact Alaska AirlinesHow toFind Things You LostHow toOrganize Your Garage

      Advertisement

      About this article

      How to Razor Cut Long Hair (with Pictures) (32)

      Co-authored by:

      Ashley Adams

      Professional Hair Stylist

      This article was co-authored by Ashley Adams. Ashley Adams is a Licensed Cosmetologist and Hair Stylist in Illinois. She completed her Cosmetology education at John Amico School of Hair Design in 2016. This article has been viewed 19,680 times.

      12 votes - 50%

      Co-authors: 6

      Updated: April 14, 2020

      Views:19,680

      • Print

      Thanks to all authors for creating a page that has been read 19,680 times.

      Did this article help you?

      Advertisement

      How to Razor Cut Long Hair (with Pictures) (2025)
      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Golda Nolan II

      Last Updated:

      Views: 6298

      Rating: 4.8 / 5 (78 voted)

      Reviews: 93% of readers found this page helpful

      Author information

      Name: Golda Nolan II

      Birthday: 1998-05-14

      Address: Suite 369 9754 Roberts Pines, West Benitaburgh, NM 69180-7958

      Phone: +522993866487

      Job: Sales Executive

      Hobby: Worldbuilding, Shopping, Quilting, Cooking, Homebrewing, Leather crafting, Pet

      Introduction: My name is Golda Nolan II, I am a thoughtful, clever, cute, jolly, brave, powerful, splendid person who loves writing and wants to share my knowledge and understanding with you.